The Internet's Largest
Business for Sale Marketplace

Electronics & Electrical Equipment Manufacturers For Sale

152 Electronics & Electrical Equipment Manufacturers For Sale Found.

Refine Your Search
Save This Search Get BizAlert
$2,500,000 Cash Flow: $300,000
Electronic Manufacturing Service

San Jose, CA

This firm provides Electronic Manufacturing Services (EMS). They provide full turnkey manufacturing services, including the design, manufacture and sale of boards used in various applications. Focus is on low volume, high mix/complexity business across various sectors, including semiconductor, industrial, medical/dental and high-end consumer. They are focused on low volume, high mix/complexity business across various sectors, including semiconductor, industrial, medical/dental and high end consumer. They service a highly diversified base of over 70 customers, with the top 5 customers accounting for only 41% of revenue. In alphabetical order, their biggest customers include blue chip names such as Bentek, Brüel Kjær A/S, Cirrus Logic, Intel Corporation, Intersil Corporation, LS Research, Maxim Integrated Products, NXP Semicondutors, ON Semiconductor, Silicon Laboratories, SUNI Medical Imaging and Texas Instruments. They have particular expertise in the design and manufacture of complex burn-in boards, used by semiconductor manufacturers and are the only facility in the US capable of producing turnkey burn-in boards. The combination of strong technical capability, low cost design/backend office and carefully targeted customer segment has enabled the firm to consistently achieve superior financial performance. They served nearly 70 different customers and are well diversified: the 5 largest customers accounted for just 40% of sales with the largest customer accounting for about 10% of sales. The management team is highly experienced, with a minimum of 12 years tenure and is run without on-site ownership. The overseas owner has strugled to commute from Asia and are highly motivated to sell.

$344,000 Cash Flow: $128,288
Luxury In Floor Heating Company

WA

You are not just buying a business you are buying a "BRAND"! This opportunity is being presented by a parent company that has been serving the bathroom accessory industry for over 20 years. They are looking to divest of this segment of their business (a difficult choice) in order to focus on their other product lines. This company provides a Unique Selling Proposition along with a simple business model. Good profit margins with a well branded product. Starting with established dealers and a potential to add key products this company is ready for an experienced entrepreneur to take over. Included in the sale price is $65,000 worth of wholesale inventory to get you off on the right foot. You start with plenty of marketing materials, installation brochures and the latest price list so you are ready on "day one" to start selling.

$4,300,000 Cash Flow: $666,418
Precision Equipment Manufacturer

Waukesha County, WI

This listing is for a highly profitable manufacturer of precision cutting tool inspection gages that is available to a qualified buyer. This established company offers a buyer a yearly income of over $600,000 and can be relocated to anywhere in the United States if one were so inclined. It is currently located in Wisconsin. The inspection gage parts are manufactured and sub assembled domestically by a contract machine shop. The business being sold is responsible for the design, finish assembly, sales and service of the inspection gages. Inspections are made manually or with optional automation. Custom encrypted software code written by contract source runs inspection routines on the gage using screen, scale, edge detection and comparison measurement techniques. Users are able to make, save and recall inspection scenes for repeat tools inspections. Tool documentation is included using custom .pdf documentation software or data transfer to Excel. Gages can be calibrated with custom reticles to conform to ISO specifications. With the needs to inspect cutting tools growing exponentially worldwide, this product offers exceptional potential for domestic and international growth. In addition to the substantial profits, approximately $700,000 in assets is to be transferred with the sale of the business. If you would like more information about this business, or if you would like to schedule a site visit, please contact the agent either by phone or by email.

$2,000,000 Cash Flow: $572,474
Mfg. of HD Portable Video/Audio Production Systems

Fort Lauderdale, FL

Nationally known leading builder of HD portable video production systems (Flypacks). Products are sold as turnkey mobile system allowing user to produce quality live broadcast, corp. events, lecture capture, sports programing. Customers are governments, corps., schools, houses of worship, production companies, etc. Yearly growth/Tax Return records. No tech background needed; Seller w/train-transition & consider consult agreement. Video usage stats are exploding, this company is at the center of it all. Please refer to listing #0101-49543 or 0101-50346 & ask for Randy Bring when inquiring.

$1,000,000
Manufacturer of electronic devices, circuits, components and technical

undisclosed, DE

Highly specialized German manufacturer of electronic devices, circuits, components and technical devices of all kinds ; development of customized products for special requirements from prototyping to small series; with 60 employees generating about EUR 7 mio. sales; the expected purchase price is about EUR 0,5 mio. in a share or asset deal

$1,449,000 Cash Flow: $414,173
Here's Your Sign! Make $400K Year!

Broward County, FL

25 year, turnkey sign company with mega cash flow and loyal-experienced team in place, is located at premium intersection in busy, high worth demographic area. Excellent reputation and long established client relations w large Marine Industry niche. Seller willing to stay on as desired to ensure seamless transition. Can be organized to run near-absentee. This is your sign to success! Please refer to Listing #010149100 and advisor Stephen Menges when inquiring.

Custom Electroforming Company

US

The Company manufactures high-precision, close-tolerance metal parts by electrodepositing metal in plating baths over machined aluminum mandrels or forms. Electroforming is considered to be the most accurate method in the world to make internal features or reproduce surface details and finishes. During 2014, the product breakdown was: microwave components, including waveguides, transducers, and filters: 56.7% of sales; miscellaneous parts, including NASA components, aircraft and submarine parts, gas mass spectrometer components, and medical product parts: 22.1%; and infra-red coldshields for infra-red detectors and cameras: 21.2%. The Company currently serves approximately 100 customers in the US and Canada who are primarily involved in the commercial and military microwave market, the infra-red coldshield market, and the medical products market. It operates from an owned 8,000-square foot office/manufacturing facility, which includes plating, machine shop, and assembly departments. It employs 17 full-time and 2 part-time, non-union workers, including 4 electroform, 3 assembly, 3 machine shop, and 3 quality control workers.

$3,950,000 Cash Flow: $800,000
Contract Manufacturer

NJ

Contract Manufacturer of electronic equipment, specializing in surface mount technology, and through-hole technology, of printed circuit board assemblies. Company manufacturer’s cable assemblies, electro mechanical assemblies and wire harness assemblies, as well as serving a host of other electronic assembly applications.Company is certified to ISO 9001:2008 and performs work in accordance with IPC-A-610 and J-STD-001.Recently added two brand new MYDATA state of the art auto pick and place lines employing two (My200LX) machines and, a new Heller 7 zone reflow oven (1707 MK III), to our state of the art facility.Company is located in New Jersey central to New York City, Pennsylvania and Long Island, each within a 50 mile radius.

$55,000 Cash Flow: $18,300
Golf device patented biz perfect online opportunity

Palm Beach County, FL

Online business selling patented putting training device. Includes 2 Design patents. Manufactured in the USA and business includes trademark (cleared for commerce). One is ready for a utility patent. This is a redesigned better version of a device the owner patented and sold over 1 million units in the past. Already sold 1200 units- Perfect for tv/social media, each unit sells for $20 to the consumer, with costs at $4.75 to manufacture. Website and 1200 units of inventory included. Please refer to Listing #640149425 and advisor Erin Bean when inquiring.

Manufacturer of State-of-the Art Printed Circuit Boards (PCB)

US

The Company is manufacturer of state-of-the-art printed circuit boards (PCB). The Company’s production capabilities range from fast-turnaround prototypes to high-volume runs. The Company is committed to manufacturing high-quality, complex, single-sided, double-sided, and multi-layered boards. The Company has the capabilities to manufacture boards that meet the industry's toughest specifications. The Company’s overhead and rejection rates are very low, which ensures its prices are highly competitive. Furthermore, the Company develops a close working relationship with each customer to maximize technical integrity and quality in its products. The Company’s customer base mainly consists of large-scale, blue-chip manufacturers serving the commercial and military markets primarily located throughout the Southeastern region of the US. The Company has developed a customer base of 88 active accounts operating in their geographic region. During 2014, the Company’s top five accounts constituted 59% of the Company’s revenue. As a result of repeated exceptional service, the average customer relationship has existed for over 14 years.

$890,000
Well Known Business in Decline - Great Upside

Delray Beach, FL

The Business is a long established electronic connector/component parts company that is located just west of Interstate 95 in Delray Beach, Florida, in a industrial warehouse complex. This business was started in 1973 by an active hands on person, who started the business with minimal employees in Long Island, New York. Sixteen years ago, he moved the business to its current location. The business grew and was very profitable each and every year. Six years ago, the founder of this company passed away unexpectedly and there were no designated heirs or managers to take over the operation. The founder’s wife then took over the day to day operations, but by her own admission, “things have never been the same”. This business has suffered greatly since then and is grossly mis-managed. The wife had never been a part of the business operations prior to her husband’s death and has no formal background or education to run the complexity of this business. The “Dolphin” brand is a well known national company with high recognition. While this business actually continues to gross sales steadily and actually increase some years, the profitability has gone negative.

$99,000 Seller Financing
This is a small business with good potential to be a money maker as a

Phoenix, AZ

Owner want a sale and will carry with a small down to a qualified buyer.

$275,000
Electronic Water Purification Manufacturer For Sale

Worden, OR

Electronic Water Purification Manufacturer For Sale for $275, 000! Owner has been involved in the Design, Development and Market of UV Units and Systems. Their sales are National and International. The sale includes UV Meter, Monitor and Control System which offer an inexpensive industrial true UV sensing system, Ultra Violet Ozone Air Purifier, (the ultimate solution for the control of a number of bacterias that plague ice machines, walk-in refrigerators, AC ducts and other areas). Hand Held UV Intensity meters, designed to impressively measure the relative UV intensity. All inventory worth approximately $30,000 and Furniture, Fixtures and Equipment worth approximately $35,000 are included in the sale. This includes parts, work and assembly benches, solder station, test equipment including power supplies, calibrating station, Oscilloscope, component storage, storage shelves, shipping station, desks, filing cabinets etc. Owner has more products developed and tested ready to market. No concerns regarding competition as many other companies buy their sensors for their own equipment. This is an easily relocatable business currently home based. Owner is selling as he wishes to retire. Owner will also provide training and consulting services for up to one year--fees to be discussed. Owner believes that this company has the "potential of having a multi-million sales in just a few years with forward thinking leadership". Call for more information.

$380,000 Cash Flow: $183,383
Home Theater/Audio Video Automation

Sarasota, FL

Only $75K down for a qualified buyer. Established 15 years ago, this company is a full service audio visual company. Client services range from complete custom home theaters and whole house automation to hanging flat screens and remote controls. Owner handles design and sales while two installers complete the jobs. The company has a stellar reputation and is an authorized agent for many of the top brands. The sky is the limit with this business as everyday items in our lives become interconnected. Earn an executive salary while living in paradise and selling the coolest electronic equipment on the market! This business could be purchased with a SBA loan for about $75,000 down and tax return earnings of $180,000 would give a new owner a great return on investment. Asking $380,000.

Cash Flow: $316,875 Seller Financing
Electrical Contractor, Traffic Signal Construction and Maintenance

PA

Business does electrical contractor work focused on traffic signal construction and installation. Summary Investment Considerations: • Company is PENNDOT pre-certified for PA traffic signal new construction and maintenance. • Consistent sales and profit margins maintained over many years. • Key employees are Level 3 and Level 2 certified with ISMA. • Very well-maintained assets and fleet. • Long-term relationships and outstanding reputation with key General Contractors in the region. • High margin maintenance, emergency, and supply work with several hundred signals under contract. • Owners to assist for smooth transition. • 33 year history. • Covers a broad region including several counties. • Current owners primarily managing existing opportunities. Excellent expansion potential in the region.

Manufacturer of High-End Touch-Screen Displays

US

A pioneer in its industry, the Company designs and assembles premium-quality color touch-screen display modules. These display modules are custom-engineered and sold to manufacturers of telecom products and other industrial and medical equipment manufacturers. The Company develops both hardware and proprietary software for its products, and about 35% of units are incorporated into medical devices. In FY 2015, ending June 30, 2015, the Company served 311 customers (19% outside the U.S.), many of whom are Fortune 500 companies and/or multinational OEMs. The Company has succeeded in attracting a premier customer base with no dedicated sales force or sales representative network. Displays are typically specified into a customer’s product design. Therefore, once a display module is designed into a product and it goes through regulatory approval, a long-term relationship is formed with that customer. This provides a steady flow of sales and allows for a backlog equal to three months of annual sales. The Company enjoys premium pricing for its products due to their superior quality coupled with the highest levels of customer service in the industry. Expansion opportunities include building a direct sales team and sales rep network, offering GUI design services and targeting medical design and other Original Design Manufacturers.

$7,000,000
Growing Electrical Manufacturing Company

Suffolk County, NY

This company started in a garage and has done nothing but grow. They manufacture electrical connectors and harnesses. The company employees about 75 people and is expanding again into about 12000 sq feet with a excellent long term lease in place. Sales continue to grow because of the quality and on time delivery record. They have no sales force or website so expansion potential is tremendous. They should show close to a $1,000,000 in EBITA this year. Asking 7 million open to creative financing to make deal work.

$150,000 Cash Flow: $39,100
Electronic Components Manufacturer

Santa Ana, CA

Electronic Product Assembly-Orange County, CA This established Orange County based company specializes in the assembly of electronic products, specifically capacitor and diode arrays. They are located in a popular Enterprise Zone and enjoy the incentives and tax benefits of being headquartered in such an area. At present, the business is operated by the owner, who handles administration, and three employees who see to the assembly work under his direction. Because of their high product quality and history in the business, the firm boasts a customer list of over 300 companies. They have a well-developed and highly functional website and enjoy customer relationships throughout the United States and worldwide. Included in the purchase price is $60,000 in equipment and $10,000 in current inventory. The seller desires to retire but is willing to be available for advice and ongoing consulting with the new owner. Sales: $115,000. Furniture Fixtures and Equipment Included in Purchase Price: $60,475 Seller's Discretionary Cash Flow: $39,100.00 Asking: $150,000 Disclaimer: The information above was furnished by the seller. Sunbelt Business Brokers of Orange Coast or its agents have not verified the information and makes no representations as to its accuracy or reliability. For more information call Steve Thomson, CBI, at Sunbelt of Orange Coast at 714-619-9310. Email: steve@sunbeltorange.com. Fax: 949-666-5823. For a complete listing of our currently available business opportunities go to: www.sunbeltorange.com

$150,000 Seller Financing
LED Lighting & Manufacturing Technology Company

CA

This is a great opportunity for someone with some technical experience to revive business sales and leverage current patents and trademarks to grow the business. Or for a similar type business to acquire a new product line with protected technology. The business and equipment are easily relocatable and the seller is willing to provide the necessary equipment, technology and manufacturing training, which can be easily learned by a buyer with even a little to moderate amount of technical experience. Asking price is based on prior years adjusted net profit and is very competitively priced. Seller financing also available. Call today for additional business information, and for patent and trademark details.

Seller Financing
Producer & Integrator of Unique Plant/Environmental Monitoring Tools

TX

The Company primarily sells electronic plant-environmental monitoring instruments and field network systems (37.5% of 2014 revenue), soil moisture sensors and solar measurement systems (25.1%), instrument packages and weather stations including service and consulting (21.8%), wind and electronic sensors (13.1%), and other integrated instruments (2.5%). Its unique phyto-monitoring sensors record plant activity and water consumption for growers in commercial production and for research. Transpiration, plant growth, and biomass production are analyzed with the Company’s sensors. New patented sensing methods are key techniques in water management, nutrient uptake, plant water status, as well as food product quality. To meet its goal of complete solutions, the Company integrates phyto-sensors with weather, soil, and environmental instruments providing accurate and reliable quantification of the key parameters affecting plant productivity and natural environments. Its primary customers are universities and research in agriculture or plants (33% of 2014 revenue), exports to China (25%), USDA and other federal agencies (20%), engineering and maritime exploration companies (12%), and irrigation and agricultural growing commercial application (10%). The Company’s primary market is in the USA (63% of 2014 revenue) with the remainder of revenue being generated internationally (37%).

$6,000,000 Cash Flow: $1,000,000
Retail & Commercial Electricity Provider - Partnership or Merger

Houston, TX

Smart Meter Enabled Retail Electricity to end use residential and small commercial customers in Texas. It is no secret that the wholesale price of power varies enormously based on seasonal, daily and hourly basis. This company manages the wholesale to retail interface associated this the time of use differential, provides education to the end use customer and offers the potential for consumer saving. Offers time of use plans as its two flagship retail electricity product offerings. The product is offered to credit qualified customers with a traditional ex-post ("postpay") monthly utility bill and to unestablished or credit challenged customers on a prepay basis. With the installation of smart meters worldwide, the monthly meter read cycle is no longer relevant.

Manufacturer of Premise and Network Connectivity Systems

US

The company specializes in manufacturing and distribution of network connectivity and premise wiring products, providing an end-to-end solution from the server to the user's workstation in any environment from a home, office, data center or factory floor. 2014 Revenue: 8,356,000; Gross Profit: 3,490,000; Adjusted EBITDA: 773,000

$110,000 Cash Flow: $64,012
Two (2) Cell Phone stores

Apopka, FL

The stores are located in a Prime location for the services they offer! Customers are loyal and mainly pay in CASH!!! The stores have been open for 10 years resulting in a well establish and positioned in the market reducing the buyer's risks!!!

$3,100,000
Electronics Assembly & Distribution Company

WI

This is a turn key business with excellent cash flow, specializing in assembly and distribution of computer components and devices. With 97% of sales coming through the internet, the company has a hands-off management style and limited need for sales staff. This business is poised to grow through the solid framework it was built upon and with the addition of a few sales people in key locations in the US, sales could easily $10 million in 24 months.

$2,200,000
Unique Electronics Business

King County, WA

16 year-old specialty electronics business with great reputation for delivery, stable employees, big-name customers, and more potential than they can currently fund to grow. Following a fire, the company had to bring facility up to code causing cash constraints which forced the company to turn away over $300,000 in turnkey orders each quarter. Could be a $5-6M business if they had operating capital which would enable them to accept more orders. Owner is prepared to stay on as a Production lead and train as needed. This is a turnkey business that just needs an injection of cash to fulfill their potential. *earnings listed are pro forma

$650,000
Electrical Contracting & Engineering

Richmond Hill, ON

In Business 28 years this Electrical Contracting & Engineering Company has experience in supplying & installing new and relocating existing Electrical Distribution Equipment all across the GTA. Services provided are Electrical contracting services - system design and equipment installation, production equipment safety upgrades, communication wiring. Engineering services - Substation Maintenance and Infra-Red Inspection services, power quality analysis, Coordination study, Short Circuit and arc Flash evaluation, Solar Power Grid & Grounding system Design Commission services etc...

$278,000
Manufacturer of Light Fixtures

WI

This North Eastern Wisconsin Company manufactures a line of standard and custom lighting fixtures. The fixtures are sold by several "Sales Reps" located throughout the country. The sale price includes fixtures, molds. extrusion tools and an inventory of material and parts. Contact P.C. Geffers, Associates at 920-231-8147 or E-mail us at pete@pcgeffers.com (Website - pcgeffers.com)

$3,250,000 Cash Flow: $283,237 Seller Financing
Manufacturer w/Property

CA

This is a great niche manufacturer of an engineered product used in manufacturing and metal parts industries. The staff is technical and competent to run the day-to-day operations of the business and the management team is in place. The Asking Price includes the equipment, inventory, and property currently used in the business. The company culture is one of SERVICE. They understand the importance of the customer, and the service and support shows it. This is a MUST SEE if you are serious about the manufacturing sector.

$29,000
Electronic Office Services

Miami, FL

Price reduced! Excellent opportunity, and Very profitable Business, Great location with lots of business, busy traffic area. Business provides the following: networking, wired & wireless networks, cable installations, pc upgrades & repairs, surveillance systems, point of sales systems, money transfer, through the world, phone repairs and sales, phone cards recharge Atm, tv repairs & many other services. Price Negotiable, some financing may be available Contact Realtor John Nayor to make appointment to tour business.

$650,000 Cash Flow: $208,494 Seller Financing
Technological Paradise

Gainesville, FL

Amazing opportunity to own a business that designs, installs, and perfects personalized technology systems within someone's home or office! Business is excellently located and has a state of the art showroom! I mean REALLY impressive! Employees are loyal and likely to stay. Owner will consider staying on part-time to work or consult. Books are solid and clean! Call today to find out more about this business! Please refer to listing #430145895 and ask for Dawn Marie-Crown when inquiring. Thank You!

$2,000,000
Manufacturer of casings for electronic equipment

undisclosed, DE

Manufacturer of casings for electronic components used in the solar, automotive, telecom and various other industries. 120 employees generating about 16mEUR sales a year; the expected purchase price ist about EUR 1,5mio. in a share or asset deal;

$390,000
Licensed Electrical Contracting Company

Oakville, ON

Licensed Electrical Contracting Company - Commercial/Industrial/Residential- Established Since 1997, Servicing The Greater Toronto Area. Also A Pioneer And A Leader In The World Of Electric Vehicle. Authorized Installer For Tesla And Bosch. Installed Over 500 Tesla Charging Stations In The Gta Than Any Other Company. This Business Is The Future And Has Potential To Be Ramped Up To Meet The Growing Demands From The Electric Car Industry. Extras: All Inventory & Chattels Included In The Price, Lease Details & Financials Provided To All Qualified Buyers On Signing Nda. Owner Will Stay On And Train Buyer If Required.

$1,900,000 Cash Flow: $569,361 Seller Financing
Successful Voice and Cabling Installation Business

Ocoee, FL

Business Installs voice & data cabling in multiple commercial channels. Low overhead and scale able business with year over year record of growth. Long time loyal employees and customers. Current owner had no experience when acquired and tripled the business. Contact Agent and Fax NDA. Solid L1 & Visa Business. Great for Corp Sales Executives with C Suite Experience. 2015 SDE annualized from Mid Year PL Please refer to listing #230146012 and ask for

$250,000 Cash Flow: $30,000
Manufacturer of Revolutionary Laser Measuring Device Seeking Investors

Chicago area, IL

Revolutionary measurement company that is seeking franchisees. This company produces patented, ultra-high precision laser and/or camera measurement devices that measure both inside and outside diameters and shapes of manufactured parts--automatically--under extreme conditions in hot and humid manufacturing facilities. These machines can measure the inside of very small bore holes. Only a few companies in the world can come close to producing machines that do what this machine does--and most of those machines must use probes that touch the parts being measured. The machines this company produces have excellent margins because the competition cannot produce instruments as efficiently as this company. The competitors' prices can be much, much higher for less advanced technology. The beauty of the machines from this seller is that they will measure parts that deform easily (like rubber seals), without touching the part--so the measurements are virtually error-free. All measurement specs come directly from part drawings digitally.

Custom Panel Distributor of Electrical AC/DC Drive Systems

US

This Company is a custom panel distributor that custom packages, integrates, and engineers AC variable frequency drives (VFD), DC variable speed drives (VSD), and AC drive controllers. The Company's drive systems integrate top of the line manufacturers, like ABB, Emerson (Control Techniques & Saftronics / Fincor), Siemens and WEG. This Company derives a competitive advantage by being a leader in the custom distribution industry, specifically in, AC and DC drives. Also included, this Company has a related Company which produces custom AC and DC drive systems to a Nuclear Quality Assurance 1 level facility. The majority of the Company's customers are concentrated within the automotive and oil exploration industries and contract with the Company to provide new custom panels or servicing existing equipment. The Company has approximately 900 customers in its data base and generates a 91% rate of repeat business due to the Company’s dedication to service and providing a superior product.

$448,000 Cash Flow: $106,871
Electrical Lighting & Supply Company

Putnam County, NY

This electrical lighting and supply company business for sale located in southeast Louisiana has been in operate for over 30 plus years. This turnkey operation did approximately $1Million in annual receipts and approximately $100K in cash flow last year! Business sells mostly to steady repeat customers like contactors, schools, and businesses in the area. Business has over 6,3000sqft of warehouse and retail shop space. Seller owns the building and will help to negotiate a favorable lease to the new owner. Owner is ready to retire and sell the business. Seller will help train new owner and introduce him to the regular clientele. Seller will consider some possible seller financing with a reasonable down payment from a qualified buyer. Come by and see the impressive ware house and business in action, meet the owner, see the great opportunity, make offer!

Power Supplies and Systems Distributor

US

The Company sells power supplies, converters, and other power-related products, and acts as the North America authorized/franchised distribution center by its manufacturing partners for sales and applications support. It is a unique distributor with a focused and synergistic line of only power products, offering over 10,000 standard products from over 16 “best in class” power product manufacturers located in the US, Canada, Europe, Japan, and Taiwan. The Company serves over 680 recurring customers, primarily small, medium, and large quantity OEM accounts in industrial (30% of 2014 sales), contract assembly (15%), telecom (11%), datacom (11%), medical (8%), military/aerospace (6%), and other (10%) markets. It operates from a 3,100-square foot office/warehouse facility, and employs 10 full-time and 2 part-time, non-union workers, including 4 salespeople and 5 administrative workers. The sales force and experienced staff are extremely knowledgeable regarding the Company’s broad power equipment product lines.

$2,500,000 Cash Flow: $456,000 Seller Financing
Training Provider to High-Tech Manufacturers

US

For over twenty seven (27) years, the Company has helped high tech manufacturers increase quality standards, improve productivity and maximize profits. The Company is North America’s leading provider of certification training for high tech manufacturers. The firm trains engineers, managers, supervisors and operators for well known international manufacturers of high tech products, medical devices, aerospace technology and biomedical devices. With thirteen (13) locations, the Company teaches technology professionals the skills to accelerate their careers and supplies high tech businesses the talent to succeed. With fourteen (14) Master Instructors and six (6) Design Instructors, all of the company’s are W-2 employees of the firm and represent some of the premier industry experts in their field. The Company’s VP, Technical Director helped develop and write many of the standards used worldwide. The five person support staff keeps the nationwide network of locations functioning effectively. The four-person management team in place includes three (3) veterans, each with twelve (12) plus years with the firm. The team includes an experienced VP of Operations, Master Instructor, VP, Technical Director and Controller. Revenues grew 34% over the four years ending in 2014. Revenue growth continues in 2015, with an increase of 33% year over year through July 2016.

$245,000 Cash Flow: $94,363
16 Yr Old Manufacturer

Orange County, FL

16 year old Manufacturer of Wire Products and Components. M This company has application to multiple channels of industry including automotive, Communications, Defense, and more. Ideal add on business for other manufacturers. Contact Agent and Fax NDA Please refer to listing #230145644 and ask for Mike Shea when inquiring. Thank You!

$560,000
Electronics Manufacturing Company For Sale

Cape Girardeau County, MO

The Company has been a leading manufacturer of custom made audio and video broadcast equipment for 26 years. Over 200 products are produced such as Closed Caption Encoders and Decoders, Sync and Test Pattern generators and many others.

Cash Flow: $587,497
High Tech Company

TX

High tech company, established in the early 1990’s. Designs and sells incident notification systems used in government facilities, schools, hospitals, factories and office buildings. Strong base of business in Texas with huge upside for national sales and distribution. Refer to file #70781GG. Please respond with your name, mailing address and telephone/fax number(s) so we may send a confidentiality agreement.

$450,000 Seller Financing
Manufacture Ozone Generators

Avon Lake, OH

Take great pride in providing what we believe are the highest quality ozone generators available for the price, anywhere. Following our original concept of producing the highest ozone output for the lowest cost we continue to use a no-frills, simple design on the outside and world-class components on the inside; no unnecessary features that just drive up the price of other machines; are not import resellers. Each machine contains USA components and we sell them direct ensuring you maximum value for your dollar. Because we build our own machines using our own components and sell them direct without the added cost of reseller mark-ups we can sell you the best machine, for the best price, every time.

$460,000 Cash Flow: $150,000
Lighting Products Manufacturer for Commercial

Sun Valley, CA

.Lighting manufacturing business established 16 years providing products to a diverse industry ranging from aerospace to banking and clients from large corporations to individuals. The company has evolved to providing quality outdoor lighting products. The business offers a broad range of outdoor lighting products including specification grade and architectural area lighting, bollards, wall scones, floodlights, decorative poles and mounting arms. The owner wants to retire and is willing to train the buyer, this is not rocket science an individual with mechanical abilities and business management knowledge should do very well. Business must be relocated. Cost of Goods 43% - Gross Profit 57%

Power Conversion Device Designer/Manufacturer

US

The Company is a specialty designer and manufacturer of power conversion products, including DC-DC/AC converters, frequency converters, inverters, battery chargers, battery back-ups, DC power supplies, trailer electrical interfaces, and other devices and specialty equipment. It also offers rapid prototype development, field test monitoring, and private labeling services. Approximately 10% of products are custom-fabricated per customer requirements, and 90% are standard products. The Company operates through three internal profit centers: DC-DC/AC converters (40% of 2014 revenue), truck trailer electrical interfaces (30%), and alternative energy uninterruptible systems (30%). Due to the Company's long-term presence in the industry, it sold approximately 2,600 total units during 2014. The Company targets transportation, military, industrial process control, mining, solar, and communications market segments. It maintains a base of approximately 300 to 400 customers (100 active), and over 80% of revenue comes from recurring active customer orders. Its facility comprises 7,000 square feet, is utilized for office, assembly, and warehouse purposes, and can accommodate significantly higher revenues without major facility improvements or capital equipment expenditures. The facility is staffed by two full-time personnel, as a well as two part-time individuals (contract engineer and in-house labor) on a per demand basis.

$323,000 Cash Flow: $97,000 Seller Financing
Solar Energy Design and Installation Company

Kailua Kona, HI

Exceptionally priced (Reduced 11/22), established Solar Energy Design and Installation Company with a solid foothold in the future of energy delivery systems....SOLAR. Wide open opportunity for a new owner to capitalize on the successful reputation the owner has built over the past 7 years in this tight knit community. This Company has completed over 900 installations of Solar Hot Water, Solar Pool Systems and rooftop Photovoltaic systems with nearly all customers stemming entirely from their top ranked website and by word of mouth referrals. Company is presently in the position for immediate expansion/growth by hiring outside sales agent/s to provide estimates to all the new leads that are coming in daily. Additional installers and working an additional day (Saturdays) would be needed to keep up with all the new and existing contracted work. Licensed Plumber and Electrician are willing to continue to work with new Owner (RME) who has a C-61 license. Solar is the wave of the energy future, with proper management this company is poised to be an industry leader in the local marketplace.

$275,000 Seller Financing
Video Surveillance Manufacturer for sale

Indianapolis, IN

This video surveillance manufacturer for sale was started over 20 years ago. Its focus from the beginning has been on providing customers with high-tech products crafted with an attention to consistency and detail. The company’s goal is to become a dominant player in the CCTV market. It uses cutting-edge innovation and engineering to create state-of-the-art technology to meet this goal. It has an excellent reputation as a leader in innovation in the CCTV market. Products it has introduced have led to changes in the industry.   The company for sale has stayed on top of ever-changing consumer demands. It provides products that meet and exceed today’s demands and anticipate tomorrow’s trends. It offers a full line of products of surveillance systems, DVRs, cameras, and accessories. Products have been designed and manufactured for self-distribution and for other CCTV manufacturers. All products come with a warranty and the company offers full product support, including the ability to remotely access a client’s system and help them configure it! The company for sale has many top tier national retail customers as well as web and direct to customer distributors. This company is part of the video surveillance industry. This is a robust and growing industry. With more and more companies concerned about security demand for these products has increased, creating great opportunity in this industry. The industry is predicted to grow at 19.1% from 2013’s $13.98 billion to $42.81 billion in 2019.    The real estate is owned by the Seller. The facility is approximately 22,000 square feet with the business occupying 7,000 sq. ft. (the largest space in the building). The remainder of the space is leased or available for lease. The Seller is willing to sell the real estate at fair market value or lease it for terms to be negotiated. Now is the perfect time to expand an existing company or join a growing industry!

$250,000 Cash Flow: $180,000
Two Metro PCS for sale in Queens and Brooklyn

Brooklyn, NY

This is a awesome deal for people who wants to invest on their own business. Cell Phone Store METRO PCS is for sale and not one but two stores for the price of one. The business has been opened for 5 years. 150-180 cell phones sell in a month. METRO uses T-Mobile network. There will be Training!! Do Not MISS this DEAL! Please call for more information.

Quality Commercial Security Systems Integrator

US

Founded in 2001, the Company is a commercial security systems integrator, specializing in the fire detection, access control, and video systems. The Company’s extensive client base includes commercial operations, medical facilities, education, and government sector establishments. Overall, with a superior industry reputation, strong customer relationships, and solid management team, the Company is well-positioned for continued growth. The Company specializes in the design, installation, and maintenance of integrated facility security management systems. The Company’s solutions include fire detection, CCTV/VMS systems, access control, intrusion detection, monitoring services, and many more. More specifically, the Company operates through three internal profit centers: construction contracts (82.2% of 2014 revenue), service labor and materials (12.9%), and service contracts (4.8%) bring unique talents and expertise. Since inception, the Company has established extensive personal contacts in numerous industries. The Company’s growth and success is driven by their outstanding reputation for providing high- quality security systems, sales representatives’ knowledge of the industry, superior capabilities, innovative solutions, and strong commitment to customer support.

$2,050,000 Cash Flow: $177,647 Seller Financing
Manufacturer of Precision Metal Components

Atlanta, GA

Contract Manufacturer for Custom Precision Metal Components, Business Price $2,050,000, Real Estate $1,050,000: Established in 1959, the company is known for offering high quality and competitively priced parts and assemblies. This precision metal fabricator of aluminum, mild steel, stainless steel and many other materials takes projects from prototype to production. For over fifty-nine years the company has been a reliable source for precision manufactured parts and assemblies, offering Laser Cutting Services, CNC Punching, CNC Bending, Powder Coating, Silk Screening, Metal Finishing, Hardware Insertion, Certified Welding, Spot Welding, Engineering Services and Assembly. From aerospace components to construction equipment, the company has the equipment, the know-how, and the national recognition to exceed client expectations and meet demands. The 30,000 square foot state-of-the-art manufacturing facility houses the latest in computerized metal fabrication equipment, all under one roof. It is designed to offer customers cost efficiency, superb quality and fast delivery for both low and high volume orders. In addition, the company offers the latest in CAD/CAM software for any size prototype and feasibility studies. This business is listed for sale by Walden Businesses, Inc., a prestigious mergers and acquisitions firm based in Atlanta, Georgia. For more information about this opportunity, contact Richard McConnell at (678) 277-9951 ext. 13. Please visit our website for more information about our company and the services we provide our clients.

Designer, Manufacturer of Guidance Systems for Drilling

TX

The Company is a leading innovator, designer, and manufacturer of fluxgate magnetometers and guidance systems for directional drilling. Manufactured products accounted for the majority of 2014 revenue with calibration, upgrade, and repair services accounting for the remainder. The systems are based on decades of real-world experience designing and manufacturing highly accurate, cost effective tools for challenging utility and oilfield directional drilling environments, as well as coring applications. The Company products are utilized primarily by utility construction/horizontal directional drilling customers along with mining customers and oil and gas drilling customers. The Company’s high quality and accurate products are applicable to customers around the world and geographic markets include the United States, Australia, Europe, Canada, Mexico and India.




About BizBuySell

BizBuySell is the leading online marketplace for both finding and selling businesses available for sale. Due to our industry leading traffic, more business sellers choose BizBuySell as their marketplace of choice. That means if you are looking for new Electronics & Electrical Equipment Manufacturing business opportunities, you can find the best selection of what's available right here, including Lighting Manufacturer, Electronics Recycling Business, Electrical Components Manufacturer and other great Electronics & Electrical Equipment Manufacturing businesses.

If you don't find what you are looking for, don't fret. Consider setting an email alert and we'll notify you each time a business matching your criteria becomes available, or better yet, try contacting a business broker with experience in the Electronics & Electrical Equipment Manufacturing industry.